HVAC Equipment Size Estimator
A first-pass load estimate so you know what ballpark your home is in.
Rough equipment size estimator
Answer six questions and we will estimate the cooling load, the nominal tonnage and the furnace input your house is likely to need. It is a sanity check, not a substitute for a load calculation.
Rule-of-thumb only. A real equipment selection needs an ACCA Manual J load calculation using your actual construction, window orientation, duct capacity and infiltration rate. Wilson's performs one before recommending equipment.
Why oversizing is worse than undersizing
An oversized air conditioner reaches the thermostat setting quickly and shuts off before it has removed moisture. The house ends up cool and clammy, the compressor short-cycles, and both comfort and equipment life suffer. Undersized equipment runs long and wears out, but it dehumidifies properly while it does.
What a load calculation includes
- Floor area, ceiling height and room-by-room exposure
- Wall, ceiling and floor insulation values
- Window area, glazing type and orientation
- Infiltration and ventilation air
- Internal gains from people and appliances
- Duct location and losses
One ton in one sentence
A ton of cooling is 12,000 BTUs per hour of heat removal. Rule-of-thumb sizing in the South Carolina Midlands lands around one ton per 500 to 700 square feet, depending entirely on the envelope.
Need a repair, a quote or a second opinion?
Call Wilson's Refrigeration and A/C Service and talk to the people who will actually do the work. Same-day service is available on most calls.