Licensed & insured · SC License M 101503 · Serving Newberry County since 1985 (803) 276-9685 Mon–Fri 8:00 AM–5:00 PM

HVAC Maintenance & Tune-Ups

A measured inspection, not a two-minute glance at the filter.

Why annual service pays for itself

A heating and cooling system is the hardest-working appliance in the house and the only one most people never service. A dirty coil or a weak capacitor does not announce itself; it simply raises the electricity bill and shortens the compressor's life until something fails at the worst possible moment.

  • Keeps efficiency at the rating plate instead of two points below it
  • Protects the manufacturer's warranty, which requires documented maintenance
  • Finds failing capacitors, contactors and blower motors before they strand you
  • Catches refrigerant leaks while the charge is still cheap to correct
  • Verifies heat exchanger and combustion safety before winter
  • Extends equipment life — typically several years on a well-maintained system

Book a tune-up

Cooling tune-ups in spring, heating tune-ups in autumn. Call (803) 276-9685 and ask for the seasonal special.

Request a tune-up

What a tune-up is not

It is not a two-minute glance at the filter. It is a measured inspection with airflow, electrical and refrigerant checks and a written record.

What we check on a cooling tune-up

Airflow

Static pressure, filter condition, blower wheel cleanliness, evaporator coil condition and return-air adequacy.

Refrigerant

Suction and discharge pressures, superheat and subcooling, and a leak inspection on accessible joints.

Electrical

Capacitor microfarad values, contactor pitting, amp draw on the compressor and both fan motors, and control wiring.

Condensate

Drain pan condition, trap, slope, float switch operation and evidence of overflow.

Outdoor unit

Coil cleaning, fan blade balance, pad level, disconnect condition and clearance from vegetation.

Controls

Thermostat calibration, schedule review and cycling behaviour under load.

What we check on a heating tune-up

Combustion

Flame quality, gas pressure, burner cleanliness and flue draft — the checks that keep a furnace safe.

Heat exchanger

Visual inspection for cracks and corrosion. This is a carbon-monoxide safety item, not a maintenance nicety.

Ignition & safeties

Hot-surface igniter, flame sensor, pressure switch, limit switches and rollout protection.

Heat pump checks

Defrost cycle timing, reversing valve operation, auxiliary and emergency heat staging, and outdoor sensor.

Blower & filter

Motor amp draw, wheel balance, belt condition where applicable and filter replacement.

Humidity

Humidifier operation, water panel condition, solenoid and bypass damper for winter comfort.

What you can do yourself, every month

Change or clean the filter. A blocked filter is the most common cause of frozen coils and short compressor life. In our climate, monthly is realistic during peak cooling season for a 1-inch filter.

Keep the outdoor unit clear. Two feet of clearance all round, and keep grass clippings and dryer lint away from the coil.

Check the drain. Pour a cup of water into the drain pan and confirm it runs away freely. A clogged drain is the leading cause of summer water damage.

Keep registers open. Closing vents in unused rooms does not save energy; it raises static pressure and can damage the compressor.

Warranty paperwork matters

Most manufacturers require documented annual maintenance to honour parts warranties. Keep your service records — we keep copies as well, so a claim is never a scramble.

Schedule maintenance

Need a repair, a quote or a second opinion?

Call Wilson's Refrigeration and A/C Service and talk to the people who will actually do the work. Same-day service is available on most calls.