Never mix refrigerants
R-410A and R-22 operate at different pressures and use different oils. Puron® systems use components and lubricants designed for it, and the two must never be blended or substituted.
The environmentally sound refrigerant that replaced Freon 22 in new residential equipment.
Puron® is an environmentally sound refrigerant designed to protect the earth's ozone layer. It is the refrigerant that replaced Freon 22® (R-22) in new residential equipment, and it is approved by the US Environmental Protection Agency.
Federal law required manufacturers to phase out ozone-depleting refrigerants, and R-22 production and import for new equipment ended. Puron® — also known by its chemical name R-410A — has zero ozone depletion potential, which is why it became the standard.
If your system was built before the mid-2000s it almost certainly uses R-22. That matters every time it needs a charge: R-22 is no longer produced for new equipment, so the price keeps climbing.
R-410A and R-22 operate at different pressures and use different oils. Puron® systems use components and lubricants designed for it, and the two must never be blended or substituted.
Puron® runs at higher pressure than R-22, so brazing, leak testing and charging have to be done properly. That is a technician skill issue, not a product issue.
Refrigerant is never vented. We recover it, recycle what can be cleaned and return what cannot to the manufacturer for disposal or reuse, as the law requires.
When an R-22 system develops a leak, the repair is often the cheap part — the refrigerant is the expensive part, and unlike a capacitor or a contactor the price does not come back down. Two leaks in three years is usually the point where replacement is the better decision.
Puron® systems also tend to be the higher-SEER equipment, so the efficiency gain and the refrigerant risk go away at the same time.
Call Wilson's Refrigeration and A/C Service and talk to the people who will actually do the work. Same-day service is available on most calls.